How to Setup Led Lens SMT LINE
Led Lens smt line is used to place LED LENS CHIPS on the PCB Boards. ledn lens smt line consist of a Glue Dispenser which is used to apply the glue of the surface of the led pcb board and a led lens pick and place machine mainly to place the led lens chip on the led pcb board and last you need a reflow oven for the soldering process of led lens on the pcb board.
Equipment needed to setup the led lens smt line
- Glue dispenser machine
- Led lens pick and place machine
- SMT Reflow Oven
- PCB Conveyor
Glue Dispenser Machine
Glue dispenser machine is mainly used to apply the glue on pcb board , but it can also be used in the manufacturing process of Led Lens Board , the glue dispenser machine has a single head glue value with installed glue bottle.
The Operator has to program the glue dispenser machine to control the speed of the applied glue with the controlled program. Generally a glue dispenser can shot 18000 dot of glue in an hour.
DP-1200 is a standard industry glue dispenser machine which dispense the glue on the surface of led pcb board very effectively to learn more visit at faroads.com
Features
- The glue dispenser machine is controlled by a computer with Windows operating system.
- Slide-rail width adjustment structure is convenient, rapid, and stable in adjustment, guarantees the transmission rail parallels to each other, and is equipped with the aluminum alloy rail to guarantee a smooth connection and stable transmission.
- The high-speed jet valve (200p/s) or screw valve (5p/s) is equipped.
- The collection and discharge device of exhaust air is equipped
- Mark point can achieve automatic positioning safely and accurately to further reduce the damage caused due to equipment impact.
- Glue valves can adopt different modes as per the requirements of products, and their size can be voluntarily adjusted.
LENS PICK AND PLACE MACHINE
An Led pick and place machine is a smd chip shooter that places led lens beads on the surface of pcb board , the machine has 8 spindles and a single head rotatory , the machine also consists of a lens bowl feeder where there smd lens beads should be feeded in bulk quantity . The bowl feeder is also called the vibratory feeder it produces vibrations which feeds the smt lamp to the machine then the smt chip shooter picks up the lens and placed on the surface of the led pcb board accurately for this purpose you can use a led pick and place machine or a special led lens place machine .
Here are some of the top Led Lens Pick and Place machines to be found
LENS PICK AND PLACE MACHINE L2T
L2T is a high end led lens pick and place machine this machine is capable to place 25000 chip per hour not only led lens it can also place led chips on the pcb board the machine comes with twin bowl feeder with 8 feeding station and 32 standard 8mm feeder which can help to feed the led chip on the pcb board to learn more visit our site faroads.com
